Variable speed electronic pumps for filtering swimming pool water containing chlorine or salt or for use in fish farms. Equipped with a display, variable frequency drive and integrated pre-filter (inspectionable). Designed for medium-large and large swimming pools in residential building service and commercial building service. The display with push-button panel allows you to easily set the operating modes according to the time of day, the day of the week and the season. Operation with speed or flow control for greater adaptability to different installations. Thanks to the variable frequency drive, you can save energy. The permanent magnet motor is cooled by the pumped liquid. The absence of cooling fans allows the pump to be installed even in tight spaces with little air circulation and makes it quieter than pumps with fans. Equipped with connector for remote control. Bayonet lid closure. The Eswim SVRS version is equipped with a software function that disables pump suction if an obstruction is detected. SVRS means Safety Vacuum Release Systems. The 12-pin control board makes the pumps compatible with any control panel, whether analog (0 - 10 V and 4-20 mA) or digital.

Fully automatic submersible pumps with large support base designed to increase stability and the possibility of operation also in positions not perfectly perpendicular to the soil. Suitable for winter use on top of swimming pool covers, to remove rain water and prevent the cover from breaking due to the heavy weight of the accumulated water. Pump in resistant thermoplastic material. Stainless steel motor, shaft, bolts and screws. Threefold seal with interposed rings with oil pre-chamber. Built-in float for automatic operation. Submersible, asynchronous, continuous service. Stator inside a stainless steel enclosure, covered by wiring cover and capacitor.

Pump for filtration in swimming pools filled with salt water and chlorine or fishing farms in residential building service or commercial building service. Pre-filter cover in transparent polycarbonate with butterfly caps. The impeller is made of technopolymer reinforced with glass fibers or marine bronze depending on the model. Technopolymer pump body with flanged suction and delivery connections. Pump support base with rubber feet to reduce vibrations. Motor case in die-cast aluminum. Pump capable of ensuring high flow rates. Asynchronous motor with 2 or 4 poles. Mechanical seal in AISI 316 stainless steel.