Booster unit with multi-impeller pumps designed for use in residential building service and commercial building service. Euro pump with cast iron pump body. The units are composed of two pumps, two expansion tanks and an EBox panel with display (EBox Plus) that allows the pumps to be exchanged at each start and protects against dry running when combined with a float or a pressure switch. Air supply connection included. The units are supplied assembled, set up and tested directly in the factory and complete with installation and maintenance instructions and test report. The DConnect service makes remote control possible (DConnect Box supplied separately).

Two pumps booster unit with an Active Driver Plus variable frequency drive installed as standard on each pump. Designed for pressurization in residential building service, commercial building service and agriculture and irrigation. Performance depending on the version: the 2 Jet AD unit is self-priming, 2 EuroInox AD is self-priming and multi-impeller, 2 Euro AD is multi-impeller. The presence of the variable frequency drive saves energy. The units are designed to increase water pressure, which can also be used to irrigate medium sized gardens. One protection control unit is included. Inlet and outlet manifolds in zinc-plated steel (stainless steel for 2 EuroInox AD). The DConnect service makes remote control possible (DConnect Box supplied separately).

Two pumps booster unit with an Active Driver Plus variable frequency drive installed as standard on each pump. Designed for pressurization in residential building service, commercial building service and agriculture and irrigation. Performance depending on the version: the 2 Jet AD unit is self-priming, 2 EuroInox AD is self-priming and multi-impeller, 2 Euro AD is multi-impeller. The presence of the variable frequency drive saves energy. The units are designed to increase water pressure, which can also be used to irrigate medium sized gardens. One protection control unit is included. Inlet and outlet manifolds in zinc-plated steel (stainless steel for 2 EuroInox AD). The DConnect service makes remote control possible (DConnect Box supplied separately).

Unit used for rainwater management. The unit detects a lack of water in the collection system, whether from rainwater or the mains and makes corrections to ensure proper operation of the plant (that is, it does not ever leave the connected utilities dry). This system is reserved for irrigation, clothes washing, WC flushing and floor cleaning applications. The primary purpose of the Active Switch system is to give use of the rainwater priority over the use of the mains water. When there is not enough rainwater in the collection tank, the control unit switches over to the mains, ensuring that the connected use points are supplied (note the water supplied by this system is not drinkable). The system comprises a polyethylene (PE) tank and Euro Inox 30/50 IE2 centrifugal pump and a Control-D G-Set. The kit includes a wall mount bracket and a water level sensor with 20 meters of cable. The connection between the rainwater collection tank and the mains water collection tank in this system is selected by way of a three-way valve installed on the suction side of the pump.

Pump operation is precisely that of a “start-stop” system with pressure and flow control. When the pressure drops below a certain threshold level, the pump starts up. Upon closing the tap, the pump stops. If the water runs out, the pump stops and signals a fault on the pump control panel. After a set time, the pump starts back up again automatically. If all the functions’ parameters have returned to normal, then the system runs normally.

System for the management and reuse of rainwater, designed for gardening and irrigation in residential building service. Aquaprof includes a tank, a self-priming multi-impeller stainless steel EuroInox pump and a series of accessories to manage the flow of water to the house, that can be used for example to water the garden for free. It gives priority to rainwater consumption and when it is no longer available it automatically uses the water from the aqueduct. Equipped with a control panel with warning lights. Available in two models: Basic model with float and Top model with level probe. Wall mounting bracket included. All models are equipped with a three-way valve. The mixed use of the different types of water means that even the water supplied by the water network but leaving the System must be considered non-drinkable.

Multi-impeller centrifugal pumps, designed for pressurization, gardening and irrigation activities in domestic and residential environments. The Euro pump has a cast iron pump body, EuroInox has a stainless steel pump body, EuroCom has a technopolymer pump body. Silent, multi-impeller pumps, they are able to increase water pressure. Motor shaft in stainless steel, air cooled motor. Power cord not supplied. The EuroInox version is equipped with a self-priming flange. Motor circuit breaker incorporated in the single-phase version. The motor is air-cooled.

Multi-impeller centrifugal pumps, designed for pressurization, gardening and irrigation activities in domestic and residential environments. The Euro pump has a cast iron pump body, EuroInox has a stainless steel pump body, EuroCom has a technopolymer pump body. Silent, multi-impeller pumps, they are able to increase water pressure. Motor shaft in stainless steel, air cooled motor. Power cord not supplied. The EuroInox version is equipped with a self-priming flange. Motor circuit breaker incorporated in the single-phase version. The motor is air-cooled.

Self-priming single-impeller (JetCom SP) pumps or multi-impeller (EuroCom SP) pumps suitable for pumping water from swimming pools or for use with hydraulic cleaners in residential building service. Technopolymer pump body and impellers , AISI 316 stainless steel motor shaft. Air cooled motor. Single-phase version with condenser and built-in thermo-amperometric protection. All materials in contact with water are in oxidation resistant. JetCom SP pump has excellent suction capacity even in the presence of air bubbles or sandy impurities.

Multi-impeller centrifugal pumps, designed for pressurization, gardening and irrigation activities in domestic and residential environments. The Euro pump has a cast iron pump body, EuroInox has a stainless steel pump body, EuroCom has a technopolymer pump body. Silent, multi-impeller pumps, they are able to increase water pressure. Motor shaft in stainless steel, air cooled motor. Power cord not supplied. The EuroInox version is equipped with a self-priming flange. Motor circuit breaker incorporated in the single-phase version. The motor is air-cooled.

Self-priming pumps (Jet/Jetinox) or multi-impeller self-priming pumps (Euroinox) suitable for domestic use for water supply and pressurization, irrigation of gardens, or movement of water in general.
Automatic operation via CONTROL-D, with integrated dry-running protection.
CONTROL-D
Electronic controller for the command and protection of domestic pumps. Automatic on and off. Dry-running protection with fault led signaling and automatic reset. Possibility of manual reset via reset button. Anti-lock function.

Self-priming pumps (Jet/Jetinox) or multi-impeller self-priming pumps (Euroinox) suitable for domestic use for water supply and pressurization, irrigation of gardens, or movement of water in general.Automatic operation via CONTROL-D, with integrated dry-running protection.CONTROL-DElectronic controller for the command and protection of domestic pumps. Automatic on and off. Dry-running protection with fault led signaling and automatic reset. Possibility of manual reset via reset button. Anti-lock function.

Multi-impeller self-priming pump. The pump is designed for domestic pressurization, gardening and irrigation, and to draw ground water in residential building service. MultiInox is equipped with 3,4 or 5 impellers in stainless steel, thus being able to greatly increase the water pressure in the home or to water the garden. The MultiInox pump has the pump body in stainless steel and the air-cooled motor. Self-priming capacity up to 8 m. Power cord and plug included.