Submersible pump for draining drainage water and rain water in domestic and residential applications It is available in automatic version with built-in float switch, or in manual start version. Its typical application is to empty garages and floors to prevent flooding. It can also be used for emptying tanks or cisterns and as a portable pump in emergency situations where water needs to be drained from flooded rooms. The Nova range has been redesigned on the occasion of the forty years of marketing, making it even more reliable, resistant and ergonomic. It has a new treated cable and a new, more compact and efficient motor. The pump body, the impeller and the suction grid are in technopolymer, the motor shaft is in AISI 431 stainless steel, suitable for lightly salty water. The impeller is treated to prevent corrosion. Nova is robust and reliable, also thanks to the triple ring seal in oil bath and the submersible continuous duty asynchronous motor. The stator is inside a hermetic stainless steel casing and the rotor is mounted on oversized ball bearings. Built-in thermal protection in all single-phase versions. Maximum dry run time: 1 minute. In compliance with European standard EN 60335-2-41, the 10-meter power cable is mandatory for the pump in external use.
Minimum draught depth:
NOVA 180 MA: 90 mm
NOVA 180 M-NA: 8 mm
NOVA 200 M-NA: 8 mm
NOVA 300 MA: 100 mm
NOVA 300 M-NA: 13 mm
NOVA 600 MA: 150 mm
NOVA 600 M-NA: 30 mm

Multi-purpose submersible pump specially built for use in salt water. Corrosion and oxidation resistant materials. AISI 316 stainless steel motor cover, motor shaft and fasteners. Cable with tin plated conductors. Motor with thermal overheating protection. Wear-resistant motor shaft and impeller. Very efficient motor cooling, allowing the pump to also be used only partially submerged. Automatic version with float switch for automatic pump start and stop. Fitted with power input cable with plug and self-sealing connector.

Vertical delivery draining pump, available in automatic or manual version, with removable filter for suction of particles up to 5 mm in domestic and residential applications; these features make it a robust pump and increase its versatility of installation. Technopolymer pump body, impeller, cover and suction grid. Stainless steel motor, rotor shaft, and bolts and screws. Threefold seal with interposed rings with oil pre-chamber. Submersible continuous duty asynchronous motor. Stator enclosed in airtight stainless steel casing. The rotor is mounted on oversized permanently lubricated ball bearings. Built-in thermal-amperometric protection and permanently connected capacitor.
Minimum draught depth:
NOVA UP 300 M-A 120mm
NOVA UP 300 M-NA 60mm
NOVA UP 600 M-A 165mm
NOVA UP 600 M-NA 70mm

Nova UP MAE is an electronic submersible drainage pump with vertical delivery, with a removable filter adjustable for suction up to 5 mm. The probe adjustment slider allows you to vary the on-off level of the pump; this feature increases its installation versatility. The vertical delivery and the electronic float make it a pump suitable for use in small wells. Nova UP MAE has the pump body, impeller, cap and suction grille in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. Continuous service asynchronous type submersible motor. Stator inserted in an airtight stainless steel casing. Built-in thermo-amperometric protection and permanently inserted capacitor. Non-return valve and fitting adaptable to the various pipe diameters included.

Minimum draft depth:

NOVA UP 300 MAE: 60 mm

NOVA UP 600 MAE: 70 mm

Submersible pumps suitable for pumping clean water, specially designed for small sumps (minimum 20 cm x 20 cm). Pump with built-in float for use in domestic and residential applications. Made of corrosion and oxidation resistant materials. Low start level (10-15 mm in manual mode). Operation mode selector: manual or automatic. Easy access to the float for cleaning, thanks to the removable cover. Motor with thermal overheating protection. Very efficient motor cooling, allowing the pump to also be used only partially submerged. Fitted with power input cable with plug, check valve and 4-level connector.