Electronic control panel for the protection and automatic operation of one or two single-phase submersible or pressurization pumps for domestic applications. Compatible with all pump models with current between 1 and 12 A with power up to 2,2 kW, as shown in the product compatibility table. Available with 3"" display (D versions) which guide the installer during the initial installation settings, monitor the status of the pumps and sensors, set the start/stop levels and view the error list. EBOX PLUS Electronic control panel for the protection and automatic operation of one or two submersible or pressurization pumps, both single-phase and three-phase, installed in residential building service or commercial building service. Thanks to the possibility of regulating the current, the panel is compatible with all pump models supplied with current between 1 and 12 A with power up to 5,5 kW as shown in the product compatibility table. Available with 3" display (D versions) which guide the installer during the initial installation settings, monitor the status of the pumps and sensors, set the start/stop levels and view the error list. For all EBOX, thanks to H2D and DConnect Box or DConnect Box 2, you can monitor and control the systems locally or remotely, on a smartphone, PC or tablet.

Electrical control panel for the protection and automatic operation of one or two submersible pumps, both single-phase and three-phase, installed in a commercial environment. Thanks to the possibility of regulating the current, the panel is compatible with all pump models powered with a current between 1 A and 29 A as reported in the product compatibility table. Guided procedure (Wizard) from the display or other connected devices that allows you to start the pumps in just a few steps. All configurations, controls and alarm viewing also takes place directly on a smartphone or tablet with the app, or on a PC portal, through H2D. With its native embedded connectivity, it provides timely and immediate information whenever needed, enabling continuous monitoring and efficient system management, through alarm notifications and prompt preventive actions. In the absence of a WiFi connection, it is possible to use the DAB WiFi modem kit, powering it directly from the dedicated USB port, located inside the panel.

Alarm and monitoring device designed to be used with automatic drainage and wastewater pumps in residential drainage systems. It features an audible buzzer alarm and is pre-configured for connection to an optional high-level float switch, available as an accessory. Maintenance-free operation. LED indicators provide pump operating status and alarm notification, while a dedicated button allows alarm muting. The device is equipped with a volt-free (dry) contact for remote alarm monitoring.