Before starting the pump, make sure that:

• the voltage and frequency specified on the pump’s nameplate coincide with those of the available power supply;
• there are no signs of damage to the pump or its power cord;
• the electric connection is made in a dry place, protected against any risk of flooding;
• the electric system is complete with a residual current circuit-breaker (I ∆ ≤ 30 mA) and an efficient
  earthing connection;
  
  

The floating switch starts and stops the pump automatically. The water level that prompts the starting and stopping of the pump can be adjusted by changing the length of cable between the holder and the float. N.B. The length of cable for the float must never be shorter than 10 cm. We recommend you read the instruction manual of the Feka BVP (also available in our DNA software) for all information on the product.

The electric system is complete with a residual current circuit-breaker (I ∆ ≤ 30 mA) and an efficient
earthing connection; the length of the power cord is no more than 10 meters. Any extension cords must comply with the requirements of the DIN VDE standard 0620. We recommend you read the instruction manual of the Feka BVP (also available in our DNA software) for all information on the product.